In-die tapping machine

The in-die tapping machine is installed in the stamping die to realize simultaneous tapping during stamping, thereby avoiding the labor and equipment cost of secondary tapping outside the die and realizing efficient and stable production. The in-die tapping machine is divided into the following types according to the different requirements of the product: 1. Mechanical screw tapping machine Stamping speed: SPM100 times/min. The product has strong versatility. The screw part can be used in the same stroke. Only the tapping head assembly can be replaced. Tapping specification range: M1-M10. It is suitable for horizontal and vertical screw hole forming. One tapping machine can have a variety of screw specifications. One tapping machine can tap up to 12 holes with quick insertion of tapping heads and quick self-locking installation of taps. 2. Servo-motor tapping machine Stamping speed: SPM100 times/min, tapping specification range: M1-M20, suitable for horizontal and vertical screw hole forming, a tapping machine can have a variety of screw specifications, a tapping machine can tap up to 12 holes, quick plug-in installation tap, quick self-locking installation. 3. In-die tapping machine for transfer die Stamping speed: SPM100 times/min, strong product versatility, not limited by the punch stroke, tapping specification range: M1-M30, suitable for horizontal and vertical screw hole forming, a tapping machine can have a variety of screw specifications, a tapping machine can be up to 12 holes, tapping head quick plug-in installation, tap quick self-locking installation.